Passivhaus Series: 3. Building Services for Passivhaus - London

Event three of a series of four half-day Passivhaus events held in conjunction with AECB CarbonLite and Pollard Thomas Edwards.

The Green RegisterAECB CarbonLite and Pollard Thomas Edwards are pleased to be working together to provide four half-day technical sessions in London on the Passivhaus principles.

Although the full Passivhaus training is a fantastic way to gain an in depth understanding of all aspects of Passivhaus design, some construction professionals may not have the time or resources to be able to attend the typical Passivhaus two week course.

These afternoon sessions offer insight into all the main principles i.e. what makes a good low energy, comfortable building based on the Passivhaus standard. The training is ideal for architects and other design professionals as the focus in these courses is on design principles. Each of the four sessions will be run by experts in the field.

Each of the four sessions will be run by experts in the field who are actually successfully designing/ building Passivhaus in UK. Amongst others, Bill Butcher, Alan Clarke, Sally Godber, Nick Grant, Eric Parks, Marine Sanchez, Mark Siddall; and Passivhaus Certifiers Will South, Mike Roe and Peter Warm. Assisted by Passivhaus Designers Tom Dollard and Lucy Pedler.

Attendance at all four sessions will make you eligible for Green Register membership

Event Three: Building Services for Passivhaus, with Peter Warm

What Building Services are necessary for a Passivhaus?  This half day session explores the different services required in true low energy buildings. In these buildings, the heat requirement is usually smaller than the other loads such as hot water, and one of the reasons for this, after the fabric first approach, is the adoption of Mechanical Ventilation with Heat Recovery (MVHR) systems.

These mechanical ventilation systems need to be integrated into the building for successful operation, and we look at the necessary components, how they should best be installed, their space requirements, and where the supply and extract ducts need to be terminated. The maintenance access requirements (filter changes) are considered. We touch on commissioning and how this needs to be carried out. There is a small group exercise of finding suitable locations and spaces for the equipment on a simple plan, all from the point of view of a non specialist.

The second part of the session looks at how the choice of fuel for heating and hot water system can be different from conventional buildings: The Passivhaus requirement for heating systems is to produce a continuous trickle of heat, rather than a conventional system switched on and off by a time switch.

The design of hot water systems can be improved to minimize losses, using radial plumbing in small diameter pipes, and there is a short group exercise on this. The definition of Primary Energy is explained and how to pass the Passivhaus requirements for this, in particular the effect of fuel choice and the difficulties communal heating systems can bring.

Who should attend?
This course is aimed principally at building professionals in the UK:  Architects, Builders, Structural and Services Engineers, Quantity surveyors and Potential Clients – all can learn how to deliver real low energy buildings. It introduces the principles behind the Passivhaus standard and for achieving low energy performance. Unlike the full Passivhaus Designer course and exam, these sessions do not require calculations, but show the principles behind the standard so that every member of the design team can understand what the Passivhaus Designer on the team is doing.

About the trainer:

Peter Warm is a Chartered Energy Conservation Engineer with a strong interest in insulation.  He’s built a few houses, and lived in some of them. Currently, Peter is a director in  WARM: Low Energy Building Practice in Plymouth. This practice, set up with his daughter Sally Godber, now focusses almost entirely on Passivhaus design.  He is one of the Passivhaus Institut’s UK certifiers.

All Events in London:

  • 3rd October 2017 – Fundamentals of Passivhaus
  • 10th October 2017 – Construction for Passivhaus
  • 17th October 2017 – Building Services for Passivhaus
  • 31st October 2017 – Putting Passivhaus into Practice

Other UK dates:

Fundamentals of Passivhaus: Bristol, Jan / Feb 2018 dates TBC
Construction for Passivhaus: Bristol, Jan / Feb 2018 dates TBC
Building Services for Passivhaus: Bristol, Jan / Feb 2018 dates TBC
Putting Passivhaus into Practice: Bristol, Jan / Feb 2018 dates TBC

BOOKING DETAILS:-

To book visit: www.passivhaustraining.co.uk/bitesize-london/

Please see here for an overview of all events: www.passivhaustraining.co.uk/bitesize/

Costs:

TGR/AECB/PHT members: £112 excl. VAT per session / discounted rate of £400 excl. VAT for all four sessions

Non-Members: £125 excl. VAT per session / discounted rate of £450 excl. VAT for all four sessions

Note:

The Green Register are fully supporting and involved in this series of events, however the booking process, event content and pricing are dealt with externally via the booking site. For any queries on this, please contact: training@peterwarm.co.uk

This event is held in conjunction with

With thanks to partners

October 17th, 2017 2:00 PM   to   5:30 PM
Pollard Thomas Edwards
Diespeker Wharf
38 Graham Street
London, N1 8JX
United Kingdom

Show large map
Members (AECB, PHT, TGR) - excl. VAT £ 112.00
Non-members - excl. VAT £ 125.00

Help spread the word

Please help us and let your friends, colleagues and followers know about our page: Passivhaus Series: 3. Building Services for Passivhaus - London


You can also share the below link in an email or on your website.
https://www.greenregister.org.uk/civicrm/event/info?id=356&reset=1
Twitter icon
Google icon
LinkedIn icon
Pinterest icon
Reddit icon
e-mail icon